Brick Paver Restoration
Brick paver maintenance: re-leveling, repair, cleaning, removal of moss, dirt & stains, stripping, joint re-sanding & sealing.
Repairs: We assign an experienced repair tech to diagnose & fix problems for the lowest cost possible. You will always receive a free estimate prior to the start of any repair work. Common repairs include re-leveling low or high spots, replacing cracked concrete edge restraint with new edging, adding base underlayment & compacting, replacing damaged or missing pavers, re-building steps and retaining walls.
Cleaning: Periodic cleaning of brick pavers extends the life & appearance. New & previously unsealed pavers give off concrete dust which is easily tracked onto interior flooring. Stains begin to accumulate rapidly in the pores of the surface. As new pavers cure, calcium oxide is released & begins to appear on the surface as a white powdery substance or white rings. We apply specialized brick paver cleaners used in conjunction with pressure washing to remove stains from tire rubber, dirt, weeds, moss, mildew, mold, algae, grease, oil & calcium oxide.
Stripping: Stripping acrylic sealer is sometimes necessary if there is a sealant build-up problem. Over application of sealer often causes a white haze to appear over the entire surface. This haze makes it difficult to see the color of the pavers, detracting from the overall look. Some acrylic sealers contain low quality acrylic resins which may turn yellow when exposed to the sun’s UV rays. When a clear sealer turns yellow, ugly or begins to peel or flake it most likely needs to be totally removed. Stripping is also a way to remove sand which was improperly sealed to the surface or edges of the pavers. We apply a powerful stripping agent that allows removal of multiple layers of acrylic sealer. Then we rinse the stripper & previous sealer away using water pressure. The result is a surface that looks like it has never been sealed before, totally restored & ready for proper re-sealing.
Joint Re-Sanding: After brick pavers are pressure washed, dirt, weeds, moss, mildew & stains are completely removed. Sand which previous filled the cracks between the pavers is washed out. We offer 2 types of replacement sand, the type required depends on the type of sealer you desire. To create a wet look, most pavers are sealed with Paver Gloss Clear Acrylic Sealer. This sealer requires the use of commercial grade joint sand. The acrylic sealer soaks into the sand to harden and stabilize it. Paver Gloss is the most effective way to lock the sand in place & prevent washout over time. If you desire a sealer that will not alter the matte surface appearance of brick pavers, then we use Techniseal RG plus polymeric sand- available in gray or tan. Once polymeric sand is installed, levels are adjusted & then we mist the sand with water to lock it in place. Polymeric sand can be used in joints up to 1” wide. It works to control erosion, insects, weeds & drainage for an extended period of time.
Sealing: After surface is cleaned & sand is filled in we apply a sealer. Our most popular sealer for brick pavers is Paver Gloss Acrylic Sealer, which creates a wet look by enhancing the natural color of brick pavers. Paver Gloss prevents moss, weeds, stains & loss of joint sand due to washout. It makes old pavers look new again by restoring the color.
If you desire no change in the natural appearance of the pavers, we recommend Surface Saver Sealer which will not alter the natural look of the treated surface. This siloxane sealer forms a chemical bond up to ¼ inch below the surface which prevents water penetration and is 100% breathable. Future stains become easier to remove because they can no longer penetrate the pores of the sealed surface.
To request a free estimate click on the contact us link or call 248-475-0004. To purchase Surface Restoration System professional grade products, go to our store.